CC164 (bizhub 287/227)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble typeCC164: ROM contents error (MSC)
RankC
Trouble detection condition-The wrong model of firmware is detected in the MFP board when the main power switch is turned ON.
-The machine type information (Machine, Type) registered to the machine differs from the actual machine type.
Trouble isolation–
Relevant electrical parts-MFP board (MFPB)
-eMMC board (eMMC)

 Procedure

  1. Check the ROM version.
  2. Check the machine type information registered and reenter as necessary.
  3. For details the machine information, see Entering the machine type information.
  4. Rewrite the firmware.
  5. Replace MFPB. (Part# A7AHH0201D)
  6. Replace eMMC. (Contact Konica Minolta technical support if the eMMC board needs to be replaced.)
  7. If the above actions do not solve the problem, contact KM.

K.3.17.7 (Link to the Field Service Manual)