CC186 (bizhub C3320i)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble typeCC186: Dynamic link error during starting (OAP)
RankC
Trouble detection conditionA dynamic link error occurs in the program on the CPU board due to an insufficient memory space available, a ROM fault, or other reason when the main power switch is turned ON.
Trouble isolation–
Relevant electrical parts-CPU board (CPUB)
-Base board (BASEB)

Procedure

  1. If the trouble code “C-C180” has occurred, check to install the appropriate loadable device driver for an authentication unit which is installed to the MFP.
  2. When the appropriate loadable device driver is not installed, reinstall the appropriate loadable device driver.
  3. Check CPUB for proper installation and correct as necessary.
  4. Replace CPUB. (Part# AAJRH01005)
  5. Replace BASEB. (Part# A93EH02007)
  6. If the above actions do not solve the problem, contact KM.

L.3.16.7 (Link to the Field Service Manual)