CD392 (bizhub 750i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| Trouble type | CD392: Nonvolatile data save error (EEPROM) |
| Rank | C |
| Trouble detection condition | The backup board (ERB) is replaced with a new one. |
| Trouble isolation | – |
| Relevant electrical parts | Backup board (ERB) |
Procedure
- Replace the following components with new ones.
Configure [New Release] in Service Mode before replacing the image transfer belt unit and the fusing unit. When the transfer roller has been replaced with a new one, perform [Counter clear].- Developing unit/K (Part# ACV803D)
- Drum unit/K (Part# ACV80RE)
- Toner cartridge/K (Part# ACYP030)
- Transfer belt unit (Part# AA2JR73100)
- Fusing unit (Part# AA7NR70200)
- Transfer roller (Part# AA7NR70400)
- Feed roller
Tray 1-4: (Part# A64J564101)
Manual bypass tray: (Part# A00F623201)
Dual Scan Document Feeder: (Part# A00J563600) - pick-up roller
Tray 1-4: (Part# A64J564201)
Manual bypass tray: (Part# A5C1562200)
Dual Scan Document Feeder: (Part# 9J07330102) - separation roller (including options)
Tray 1-4: (Part# AA2J560000)
Manual bypass tray: (Part# AA7N591100)
Dual Scan Document Feeder: (Part# 9J07340901)
- Turn OFF the main power switch and unplug the power cord. Connect the power cord after 15 sec. or more, and turn ON the main power switch.
- Set the various setting values in the service mode again.
- If the above actions do not solve the problem, contact KM.