CD704 (bizhub 360i/300i)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	CD704: Finisher Flash ROM device error (When FS-533 or JS-506 is installed)
Rank	C
Trouble detection condition	An erase error or other device fault occurs during the finisher flash ROM writing.
Trouble isolation	–
Relevant electrical parts	<When FS-533 is installed> FS control board (FSCB)
	<When JS-506 is installed> JS control board (JSCB)

Procedure

When FS-533 is installed

1. Turn OFF the main power switch and unplug the power cord. Connect the power cord after 15 sec. or more, and turn ON the main power switch.
2. Rewrite the firmware.
3. Replace FSCB.
   (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2)

When JS-506 is installed

1. Turn OFF the main power switch and unplug the power cord. Connect the power cord after 15 sec. or more, and turn ON the main power switch.
2. Rewrite the firmware.
3. Replace JSCB. (Part# A2YVH10102)

(Link to the Field Service Manual)