How Can We Help?

CFCE# (bizhub 368e/308e)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeCFCE#: Abort code
RankC
Trouble detection condition–
Trouble isolation–
Relevant electrical partsCFCECMFP board (MFPB)

CFCE0 – CFCE8
Dual scan image processing board (DSIPB: DF-704)

Procedure

  1. Turn OFF the main power switch, disconnect and then connect the power cord. Wait for 10 sec. or more after connect the power cord, and turn ON the main power switch.
  2. Check the connectors of DSIPB for proper connection and correct or replace as necessary.
  3. Check the connectors of MFPB for proper connection and correct or replace as necessary.
  4. Rewrite the firmware.
  5. Execute [Service Mode] -> [State Confirmation] -> [Memory/Storage Adjustment] -> [Memory Check] -> [Rough Check], and check that no abnormalities. When “NG” is displayed, replace the appropriate memory or PWB.
    • WORK0: Standard memory (MFPB)
    • FILE0,1: MFP board (MFPB)
    • FILE4,5: Dual scan image processing board (DSIPB: DF-704)
  6. Replace DSIPB. (Part# A7PUH02A01)
  7. Replace MFPB. (Part# AA6VH02101)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

L.3.27.9. (Link to the Field Service Manual)

Table of Contents