CFD4# – CFD5# (bizhub C360i/C300i/C250i)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeCFD4# – CFD5#: Abort code
RankC
Trouble detection condition–
Trouble isolation–
Relevant electrical partsCFD40 – CFD46EFI relay board (EFIRYB: VI-516)
CFD47 – CFD5F Memory board (MEMB: UK-115)

Procedure

  1. Turn OFF the main power switch and unplug the power cord. Connect the power cord after 15 sec. or more, and turn ON the main power switch.
  2. Check the connectors of EFIRYB for proper connection and correct or replace as necessary.
  3. Check the connectors of MEMB for proper connection and correct or replace as necessary.
  4. Execute [Service Mode] -> [State Confirmation] -> [Memory/Storage Adjustment] -> [Memory Check] -> [Rough Check], and check that no abnormalities. When “NG” is displayed, replace the appropriate memory or PWB.
    • FILE0: Memory board (MEMB: UK-115) A800 image memory ChA
    • FILE1: Memory board (MEMB: UK-115) A800 image memory ChB
  5. Replace EFIRYB. (Part# AA2JH02800)
  6. Replace MEMB. (Part# AA2JH02A01)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

L.3.20.15. (Link to the Field Service Manual)