S-1 (bizhub C360i/C300i/C250i)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Malfunction typeCCD gain adjustment failure
Malfunction codeS-1
Malfunction detection timingIt is detected that the CCD clamp gain adjustment value is faulty.
Relevant partsLED exposure unitCCD unitScanner drive board (SCDB)Base board (BASEB)

Procedure

  1. Correct the connector connection between CCDB CN2-BASEB CN6 if faulty.
  2. Check for possible extraneous light and correct as necessary.
  3. Clean the lens, mirrors, CCD surface, and shading sheet if dirty.
  4. Correct reflective mirror of the scanner if faulty, or change scanner mirror.
  5. Replace the CCD unit. (Part# AA2JR70100)
  6. Replace SCDB. (Part# AA2JH01A00)
  7. Replace BASEB. (Part# AA2JH02005)

L.2.3 (Link to the Field Service Manual)