S-2 (bizhub 360i/300i)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Malfunction typeCIS gain adjustment failure (When DF-714 is installed)
Malfunction codeS-2
Malfunction detection timingIt is detected that the CIS clamp gain adjustment value is faulty.
Relevant parts-CIS module (CIS)
-CPU board (CPUB)
-Base board (BASEB)

Procedure

  1. Correct the connector connection between CIS J221-BASEB CN5 if faulty.
  2. Check CPUB for proper installation and correct as necessary.
  3. Check for possible extraneous light and correct as necessary.
  4. Wipe clean the back side scanning glass surface and shading sheet.
  5. Replace CIS. (Part# AAMNM70000)
  6. Replace CPUB. (Part# AC77H02P02)
  7. Replace BASEB. (Part# AC77H02101)

(Link to the Field Service Manual)