C1114 (bizhub 754e/654e)
Contents
Trouble type | Alignment motor’s malfunction | |
Trouble code | C1114 | |
Rank | B | |
Detection timing | <When FS-534+SD-511 is installed><When FS-535+SD-512 is installed> The alignment home sensor (PS4) is not blocked or unblocked even after the set period of time has elapsed after the alignment motor (M3) is turned ON. | |
Trouble isolation | • Half-Fold/Tri-Fold Center Stapling | |
Relevant electrical parts | <When FS-534+SD-511 is installed><When FS-535+SD-512 is installed • Alignment motor (M3) • Alignment home sensor (PS4) • SD drive board (SDDB) • FS control board (FSCB) | |
(2)ProcedureWhen FS-534+SD-511 is installed
Step | Action | Control signal | Location of electrical components |
1 | Check the connector between M3-relay CN10-SDDB J7 for proper connection, and correct as necessary. | – | – |
2 | Check the connector of M3 for proper drive coupling, and correct as necessary. | – | – |
3 | Check the connector between PS4-relay CN10-SDDB J7 for proper connection, and correct as necessary. | – | – |
4 | PS4 I/O check, sensor check | SDDB J7-6 (ON) | SD-511 6-F |
5 | M3 operation check | SDDB J7-7 to 10 | SD-511 5-F to G |
6 | Replace M3 (Part# A3EPPP5600 ) | – | – |
7 | Replace SDDB (Part# A3ERPP6J03 ) | – | – |
8 | Replace FSCB (Part# A3EPPPBE01 ) | – | – |
- Link to the wiring diagram (N.2.5 Saddle stitcher SD-511)
- Link to the layout drawings for related parts by each trouble code (S.23.1 SD-511)
When FS-535+SD-512 is installed
Step | Action | Control signal | Location of electrical components |
1 | Check the connector between M3-relay CN10-SDDB J7 for proper connection, and correct as necessary. | – | – |
2 | Check the connector of M3 for proper drive coupling, and correct as necessary. | – | – |
3 | Check the connector between PS4-relay CN10-SDDB J7 for proper connection, and correct as necessary. | – | – |
4 | PS4 I/O check, sensor check | SDDB J7-6 (ON) | SD-512 5-G |
5 | M3 operation check | SDDB J7-7 to 10 | SD-512 5-F to G |
6 | Replace M3 (Part# A2Y1M10000 ) | – | – |
7 | Replace SDDB (Part# A3ERPP6J03 ) | – | – |
8 | Replace FSCB (Part# A2Y1H10002 ) | – | – |
- Link to the wiring diagram (N.2.9 Saddle sticher SD-512)
- Link to the layout drawings for related parts by each trouble code (S.23.2 SD-512)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
(Link to the Field Service Manual) C1114