66-05 (bizhub C3320i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
JAM type | Misfeed at DF document reading section | |
JAM code | 66-05 | |
JAM detection timing | -The document before read sensor (PS18) is not turned OFF even after the lapse of a given period of time after the document registration sensor (PS17) has turned OFF (blocked). -During transporting document, the paper information is not cleared even after the lapse of a given period of time. -The timing of start of scanning the front side of a document is not notified even after the lapse of a given period of time after the document before read sensor (PS18) has turned ON. -The timing of end of scanning the front side of a document is not notified even after the lapse of a given period of time after the document before read sensor (PS18) has turned OFF. -The timing of start of scanning the back side of a document is not notified even after the lapse of a given period of time after the document before read sensor (PS18) has turned ON. -The timing of end of scanning the back side of a document is not notified even after the lapse of a given period of time after the document before read sensor (PS18) has turned OFF. | |
– | Paper jam of a sheet of paper left at the DF document reading results, if the document before read sensor (PS18) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
Misfeed processing location | Left cover | |
Relevant parts | -Document main motor (M8) -Document registration sensor (PS17) -Document before read sensor (PS18) -DF control board (DFCB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | Make the adjustment of original stop position. | – | – |
3 | PS17 I/O check, sensor check | DFCB CN2-8 (ON) | 23-P |
4 | PS18 I/O check, sensor check | DFCB CN6-2 (ON) | 21-P |
5 | M8 load checkCheck code: 60Multi code: 1, 5 | DFCB CN5-1 to 4 | 21-X |
6 | Replace DFCB. (Part# A93EH00901) | – | – |
L.1.8.3 (Link to the Field Service Manual)