14-01 (bizhub 287/227)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at tray 4 feed section | |
| JAM code | 14-01 | |
| JAM detection timing | The leading edge of the paper is not turned ON the tray 4 vertical transport sensor (PS123) even after the lapse of a given period of time after the tray 4 starts to feed paper. | |
| – | Paper jam of a sheet of paper left at the tray 4 feed section results, if the tray 4 vertical transport sensor (PS123) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| – | Paper jam of a sheet of paper left at the tray 4 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| Misfeed processing location | -Right door -Tray 4 | |
| Relevant parts | -Tray 4 paper feed motor (M121) -Tray 4 vertical transport motor (M122) -Tray 4 vertical transport sensor (PS123) -PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS123 I/O check, sensor check | PCCB CN18-5 (ON) | PC-213 7-K |
| 3 | M121 operation check | PCCB CN9-1 to 8 | PC-213 6-K |
| 4 | M122 operation check | PCCB CN9-9 to 16 | PC-213 6-K |
| 5 | Replace PCCB. (Part# A7VAH00200) | – | – |
- Link to the wiring diagram (PC-213)
K.1.6.5 (Link to the Field Service Manual)