15-01, 15-40 (bizhub C750i)
lease search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at external LCT paper feed section (When LU-205 or LU-303 is installed) | |
| JAM code | 15-01, 15-40 | |
| JAM detection timing | 15-01: The leading edge of the paper is not turned ON the LU paper feed sensor (PS3) even after the lapse of a given period of time after the external LCT starts to feed paper. | |
| 15-40: For paper fed from the external LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
| Paper jam of a sheet of paper left at the external LCT paper feed section results, if the LU paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
| Paper jam of a sheet of paper left at the external LCT paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
| Misfeed processing location | Right door | |
| Relevant parts | -LU paper feed motor (M2) -LU paper feed sensor (PS3) -LU drive board (LUDB) -Base board (BASEB) -PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | Make the pick-up roller load adjustment of the LCT. | – | – |
| 3 | PS3 I/O check, sensor check | LUDB CN5-8 (ON) | LU-205 / LU-303 4-G |
| 4 | M2 load check Check code: 28 Multi code: 41, 44, 45 | LUDB CN4-5 to 8 | LU-205 / LU-303 3-G |
| 5 | Replace LUDB. (LU-205 Part# A8H6H00100 / LU-303 Part# A8H6H00100) | – | – |
| 6 | Replace BASEB. (Part# ACKNH02101) | – | – |
| 7 | PCCB F10 or F12 conduction check. | – | – |
| 8 | Replace PCCB. (Part# AAV5H01401) | – | – |