17-20 (bizhub 950i/850i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at external LCT transport section (When LU-205 or LU-303 is installed) | |
| JAM code | 17-20 | |
| JAM detection timing | 17-20 | The tray 2 vertical transport sensor (PS12) is not turned ON even after the lapse of a given period of time after the paper has turned ON the paper feed sensor (PS3). |
| – | Paper jam of a sheet of paper left at the external LCT paper transport section results, if the LU paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| Misfeed processing location | Right bottom door | |
| Relevant parts | -LU transport motor (M3) -Tray 2 vertical transport motor (M7) -LU paper feed sensor (PS3) -Tray 2 vertical transport sensor (PS12) -LU drive board (LUDB) -Paper feed/transport drive board (PFTDB) -Base board (BASEB) | |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS3 I/O check, sensor check | LUDB CN5-8 (ON) | LU-205 / LU-303 4-G |
| 3 | PS12 I/O check, sensor check | PFTDB CN12-10 (ON) | 1-P |
| 4 | M3 load check -Check code: 28 -Multi code: 21, 22, 23, 24 | LUDB CN4-1 to 4 | LU-205 / LU-303 3-G |
| 5 | M7 load check -Check code: 28 -Multi code: 13, 14, 15, 16 | PFTDB CN10-9 to 12 | 18-P |
| 6 | Replace LUDB. (LU-205 / LU-303) | – | – |
| 7 | PFTDB F24 conduction check. | – | – |
| 8 | Replace PFTDB. | – | – |
| 9 | Replace BASEB. | – | – |