13-40 (bizhub C554e/C454e)
Contents
| JAM type | Misfeed at tray 3 feed section | |
| JAM code | 13-40 | |
| Detection timing | ||
| 13-40 | For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | |
| – Tray 3 vertical transport sensor (PS113) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. | ||
| – Tray 3 paper feed sensor (PS112) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. | ||
| – In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened / closed or jam/trouble reset is done, it is regarded as paper jam at tray 3 feed section. | ||
| Misfeed processing location | • Right door • Tray 3 | |
| Relevant parts | • Tray 3 paper feed motor (M111) • Tray 3 vertical transport motor (M112) • Tray 3 paper feed sensor (PS112) • Tray 3 vertical transport sensor (PS113) • PC Control board (PCCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS112 I/O check, sensor check | PCCB CN4-11 (ON) | PC-110/PC-210 5 to 6-C |
| 3 | PS113 I/O check, sensor check | PCCB CN4-14 (ON) | PC-110/PC-210 5-C |
| 4 | M111 operation check | PCCB CN5-1 to 8 | PC-110/PC-210 4-C |
| 5 | M112 operation check | PCCB CN5-9 to 16 | PC-110/PC-210 3 to 4-C |
| 6 | Change PCCB ( Part # (A2XMH00301 ) | – | – |
- Link to the wiring diagram (N.3.1 PC-110)
- Link to the wiring diagram (N.3.2 PC-210)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
(Link to the Field Service Manual) K.1.6.4 13-40