15-40 (bizhub 658e/558e/458e)
Contents
| JAM type | Misfeed at external LCT paper feed section |
| JAM code | 15-40 |
| JAM detection timing | For paper fed from the external LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Paper jam of a sheet of paper left at the external LCT feed section results, if the paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| – | Paper jam of a sheet of paper left at the external LCT feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | Lower right door |
| Relevant parts | • LU paper feed motor (M2) • LU paper feed sensor (PS3) • LU drive board (LUDB) • MFP board (MFPB) • PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | Make the pick-up roller load adjustment of the LCT. (LU-207 / LU-302) | – | – |
| 3 | PS3 I/O check, sensor check | LUDB CN5-8 (ON) | LU-207/LU-302 4-G |
| 4 | M2 load checkCheck code: 28Multi code: 33, 34, 35, 36 | LUDB CN4-5 to 8 | LU-207/LU-302 3-G |
| 5 | Replace LUDB. (LU-207 Part# A87VH01000 / LU-302 Part# A87VH01000) | – | – |
| 6 | Replace MFPB. (658e/558e Part# AA6RH02103 / 458e Part# AA6UH02101) | – | – |
| 7 | Replace PCCB. (PC-115/PC-215 / PC-415) | – | – |
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
L.1.9.6 (Link to the Field Service Manual)