16-40 (bizhub 368/308)
Contents
| JAM type | Misfeed at transfer LCT feed/transport section |
| JAM code | 16-40 |
| JAM detection timing | For paper fed from the transfer LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Paper jam of a sheet of paper left at the transfer LCT transport section results, if the vertical transport sensor (PS133) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| – | Paper jam of a sheet of paper left at the transfer LCT transport section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | Right door |
| Relevant parts | • Paper feed motor (M131) • Vertical transport motor (M132) • Vertical transport sensor (PS133) • PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS133 I/O check, sensor check | PCCB CN4-14 (ON) | PC-410 7-J |
| 3 | M131 operation check | PCCB CN5-1 to 8 | PC-410 5-J |
| 4 | M132 operation check | PCCB CN5-9 to 16 | PC-410 4-J |
| 5 | Replace PCCB. (Part# A2XMH00301) | – | – |
- Link to the wiring diagram (PC-410)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.8.7 (Link to the Field Service Manual)