How Can We Help?
10-01 (bizhub 958/808)
Contents
| JAM type | Misfeed at manual bypass feed section | |
| JAM code | 10-01 | |
| JAM detection timing | The leading edge of the paper does not turn ON the tray 1 vertical transport sensor (PS4) even after the lapse of a given period of time after the manual bypass tray starts to feed paper. | |
| – | When the main power switch is turned ON, residual paper detection starts between each sensor. Paper jam of a sheet of paper left at the manual bypass feed section results, if the the tray 1 vertical transport sensor (PS4) is turned from OFF to ON while the tray 1 paper feed sensor (PS5) is OFF. | |
| Misfeed processing location | Manual bypass tray door | |
| Relevant parts | • Bypass paper feed motor (M27) • Tray 1 vertical transport sensor (PS4) • Paper feed/transport drive board (PFTDB) • MFP board (MFPB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS4 I/O check, sensor check | PFTDB CN14-8 (ON) | 1-P |
| 3 | M27 operation check | PFTDB CN9-3 to 6 | 12-P |
| 4 | PFTDB F11 conduction check | – | – |
| 5 | Replace PFTDB. (Part# A796H00200) | – | – |
| 6 | Replace MFPB. (Part# A796H02003) | – | – |
- Link to the wiring diagram (bizhub 958/808/758, bizhub PRO 958)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.6.1 (Link to the Field Service Manual)