11-40 (bizhub C364e/C284e/C224e)
Contents
| JAM type | Misfeed at tray 1 feed section |
| JAM code | 11-40 |
| Detection timing | For paper fed from the tray1, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Tray 1 paper feed sensor (PS23) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
| – | In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened / closed or jam/trouble reset is done, it is regarded as paper jam at tray 1 feed section. |
| Misfeed processing location | • Right door • Tray 1 |
| Relevant parts | • Transport motor (M1) • Tray 1 paper feed clutch (CL3) • Registration clutch (CL4) • Registration sensor (PS1) • Tray 1 paper feed sensor (PS23) • Front side board (FRB) • Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | FRB CN8-3 (ON) | 4 to 5-L |
| 3 | PS23 I/O check, sensor check | PRCB CN26-10 (ON) | 8-C |
| 4 | CL3 operation check | PRCB CN26-8 (ON) | 8-C |
| 5 | CL4 operation check | FRB CN8-7 (CL4_24V) | 4-L |
| 6 | M1 operation check | PRCB CN31-2 (REM)PRCB CN31-5 (LOCK) | bizhub C364e 21-Jbizhub C284e 22-Jbizhub C224e 24-J |
| 7 | PRCB ICP5 conduction check | – | – |
| 8 | Replace FRB (Part# A7PUH00500) | – | – |
| 9 | Replace PRCB (Part# A5C1H00102) | – | – |
- Link to the wiring diagram (N.1. bizhub C364e/C284e/C224e)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.6.2 (Link to the Field Service Manual)