How Can We Help?
11-40 (bizhub C754/C654)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
| JAM type | Tray 1 feed section | |
| JAM code | 11-40 | |
| Detection timing | For paper fed from the tray 1, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | |
| – | The tray 1 vertical transport sensor (PS4) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. | |
| – | When the main power switch is turned ON, the tray 1 vertical transport sensor (PS4) is turned ON while the tray 1 paper feed sensor (PS5) is OFF. | |
| Misfeed processing location | Manual bypass tray door | |
| Relevant parts | -Take-up motor (M22) -Tray 1 paper feed clutch (CL1) -Tray 1 vertical transport sensor (PS4) -Paper feed/transport drive board (PFTDB) -Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS4 I/O check, sensor check | PFTDB CN15-8 (ON) | 2-P |
| 3 | CL1 operation check | PFTDB CN15-14 (REM) | 2-P |
| 4 | M22 operation check | PFTDB CN7-5 to 8 | 12-X |
| 5 | PFTDB ICP1, ICP3, ICP12 or ICP17 conduction check | – | – |
| 6 | Replace PFTDB (Part# A2X0H00202) | – | – |
| 7 | PRCB ICP13 conduction check | – | – |
| 8 | Replace PRCB (Part# A2X0H00102) | – | – |
- Link to the wiring diagram (N.1. bizhub C754/C654)
K.1.6.2 (Link to the Field Service Manual)