How Can We Help?
13-01, 13-05, 13-40 (bizhub 360i/300i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
When PC-116 or PC-216 is installed
Contents
JAM type | Misfeed at tray 3 paper feed section (When PC-116 or PC-216 is installed) | |
JAM code | 13-01, 13-05, 13-40 | |
JAM detection timing | 13-01: After the tray 3 starts to feed paper, the tray 3 vertical transport sensor (PS113) is not turned ON even after the lapse of a given period of time after the leading edge of the paper has turned ON the tray 3 paper feed sensor (PS112). | |
13-05: The leading edge of the paper is not turned ON the tray 3 paper feed sensor (PS112) even after the lapse of a given period of time after the tray 3 starts to feed paper. | ||
13-40: For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
– Paper jam of a sheet of paper left at the tray 3 paper feed section results, if the tray 3 vertical transport sensor (PS113) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
– Paper jam of a sheet of paper left at the tray 3 paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
Misfeed processing location | -Right door -Tray 3 | |
Relevant parts | -Tray 3 paper feed motor (M111) -Tray 3 vertical transport motor (M112) -Tray 3 paper feed sensor (PS112) -Tray 3 vertical transport sensor (PS113) -PC control board (PCCB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS112 I/O check, sensor check | PCCB CN4-11 (ON) | PC-116/PC-216 5 to 6-C |
3 | PS113 I/O check, sensor check | PCCB CN4-14 (ON) | PC-116/PC-216 5-C |
4 | M111 load check Check code: 28 Multi code: 11, 14, 15 | PCCB CN5-1 to 8 | PC-116/PC-216 4-C |
5 | M112 load check Check code: 28 Multi code: 21, 24, 25 | PCCB CN5-9 to 16 | PC-116/PC-216 3 to 4-C |
6 | Replace PCCB. PC-116 (Part# AAV5H00101) PC-216 (Part# AAV5H00201) | – | – |
When PC-417 is installed
Contents
JAM type | Misfeed at tray 3 paper feed section (When PC-417 is installed) | |
JAM code | 13-05, 13-40 | |
JAM detection timing | 13-05: The leading edge of the paper is not turned ON the tray 3 paper feed sensor (PS152) even after the lapse of a given period of time after the tray 3 starts to feed paper. | |
13-40: For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
– Paper jam of a sheet of paper left at the tray 3 paper feed section results, if the tray 3 paper feed sensor (PS152) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
Misfeed processing location | Tray 3/4 horizontal transport unit | |
Relevant parts | -Transport motor (M152) -Tray 3 paper feed clutch (CL151) -Tray 3 paper feed sensor (PS152) -PC control board (PCCB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS152 I/O check, sensor check | PCCB CN7-2 (ON) | PC-417 5-C |
3 | CL151 operation check | PCCB CN19-1 (ON) | PC-417 6-C |
4 | M152 load check Check code: 28 Multi code: 51, 54, 55 | PCCB CN5-1 to 8 | PC-417 7-K |
5 | Replace PCCB. (Part# AAV5H01401) | – | – |