How Can We Help?
14-01, 14-05, 14-40 (bizhub 360i/300i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
When PC-216 is installed
Contents
JAM type | Misfeed at tray 4 paper feed section (When PC-216 is installed) | |
JAM code | 14-01, 14-05, 14-40 | |
JAM detection timing | 14-01: After the tray 4 starts to feed paper, the tray 4 vertical transport sensor (PS123) is not turned ON even after the lapse of a given period of time after the leading edge of the paper has turned ON the tray 4 paper feed sensor (PS122). | |
14-05: The leading edge of the paper is not turned ON the tray 4 paper feed sensor (PS122) even after the lapse of a given period of time after the tray 4 starts to feed paper. | ||
14-40: For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
– | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if the tray 4 vertical transport sensor (PS123) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
– | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
Misfeed processing location | -Right door -Tray 4 | |
Relevant parts | -Tray 4 paper feed motor (M121) -Tray 4 vertical transport motor (M122) -Tray 4 paper feed sensor (PS122) -Tray 4 vertical transport sensor (PS123) -PC control board (PCCB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS122 I/O check, sensor check | PCCB CN18C-2 (ON) | PC-216 7-K |
3 | PS123 I/O check, sensor check | PCCB CN18C-5 (ON) | PC-216 7-K |
4 | M121 load check Check code: 28 Multi code: 16, 19, 20 | PCCB CN9C-1 to 8 | PC-216 6-K |
5 | M122 load check Check code: 28 Multi code: 26, 29, 30 | PCCB CN9C-9 to 16 | PC-216 6-K |
6 | Replace PCCB. (Part# AAV5H00201) | – | – |
When PC-417 is installed
Contents
JAM type | Misfeed at tray 4 paper feed section (When PC-417 is installed) | |
JAM code | 14-05, 14-40 | |
JAM detection timing | 14-05: The leading edge of the paper is not turned ON the tray 4 paper feed sensor (PS162) even after the lapse of a given period of time after the tray 4 starts to feed paper. | |
14-40: For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
– | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if the tray 4 paper feed sensor (PS162) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
Misfeed processing location | Right door | |
Relevant parts | -Transport motor (M152) -Tray 4 paper feed clutch (CL161) -Tray 4 paper feed sensor (PS162) -PC control board (PCCB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS162 I/O check, sensor check | PCCB CN4-11 (ON) | PC-417 3-C |
3 | CL161 operation check | PCCB CN19-3 (ON) | PC-417 6-C |
4 | M152 load check Check code: 28 Multi code: 51, 54, 55 | PCCB CN5-1 to 8 | PC-417 7-K |
5 | Replace PCCB. (Part# AAV5H01401) | – | – |