13-01, 13-40 (bizhub 4700i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at tray 3 paper feed section (When PF-P20 or PF-P21 is installed) | |
| JAM code | 13-01, 13-40 | |
| JAM detection timing | 13-01: The leading edge of the paper is not turned ON (unblocked) the tray 3 transport sensor (PS6/3) even after the lapse of a given period of time after the tray 3 starts to feed paper. | |
| 13-40: For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
| – Paper jam of a sheet of paper left at the tray 3 paper feed section results, if the tray 3 transport sensor (PS6/3) is turned ON (unblocked) when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
| – Paper jam of a sheet of paper left at the tray 3 paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
| Misfeed processing location | -Right door -Tray 3 | |
| Relevant parts | -Tray 3 drive motor (M1/3) -Tray 3 paper feed clutch (CL1/3) -Tray 3 transport clutch (CL2/3) -Tray 3 transport sensor (PS6/3) -Tray 3 PC control board (PCCB/3) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS6/3 I/O check, sensor check | PCCB/3 CN3-3 (ON) | 17-X |
| 3 | CL1/3 load check • Check code: 20 • Multi code: 3 | PCCB/3 CN5-3 (ON) | 16-P |
| 4 | CL2/3 load check • Check code: 21 • Multi code: 2 | PCCB/3 CN5-1 (ON) | 15-P |
| 5 | M1/3 load check • Check code: 28 • Multi code: 3, 4 | PCCB/3 CN4-1 to 7 | 18-P |
| 6 | Replace PCCB/3. PF-P21 (Part# AAJUH00100) | – | – |