15-40 (bizhub 958/808)
Contents
| JAM type | LCT feed section (When LU-205 or LU303 is installed) |
| JAM code | 15-40 |
| JAM detection timing | For paper fed from the LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| Misfeed processing location | Lower right door |
| Relevant parts | • LU paper feed motor (M2) • LU paper feed sensor (PS3) • LU drive board (LUDB) • Paper feed/transport drive board (PFTDB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS3 I/O check, sensor check | LUDB CN5-8 (ON) | LU-205/LU-303 4-G |
| 3 | M2 operation check | LUDB CN4-5 to 8 | LU-205/LU-303 3-G |
| 4 | Replace LUDB. (LU-205/LU-303) (Part# A8H6H00100) | – | – |
| 5 | PFTDB F1 or F4 conduction check | – | – |
| 6 | Replace PFTDB. (Part# A796H00200) | – | – |
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.6.6 (Link to the Field Service Manual)