32-30 (bizhub 754e/654e)
Contents
| JAM type | Exit section |
| JAM code | 32-30 |
| Detection timing | Heating roller assy had a trouble rotating while printing. |
| – | The paper exit sensor (PS39) is unblocked when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | Upper right door |
| Relevant parts | • Exit motor (M4) • Fusing motor (M30) • Switchback motor (M33) • Gate switch solenoid (SD1) • Paper exit sensor (PS39) • ADU paper passage sensor/1 (PS47) • Paper feed/transport drive board (PFTDB) • Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS39 I/O check, sensor check | PFTDB CN3-12 (ON) | 5-P |
| 3 | PS47 I/O check, sensor check | PFTDB CN4-3 (ON) | 7-P |
| 4 | M4 operation check | PRCB CN27-16 to 19 | 11-K |
| 5 | M30 operation check | PRCB CN30-4 (REM)PRCB CN30-7 (LOCK) | 4-K |
| 6 | M33 operation check | PRCB CN27-12 to 15 | 11-K |
| 7 | SD1 operation check | PRCB CN27-6 (REM) | 10-K |
| 8 | Replace PFTDB (Part# A2X0H00202) | – | – |
| 9 | PRCB ICP19 or ICP21 conduction check | – | – |
| 10 | Replace PRCB (Part# A55VH00105) | – | – |
- Link to the wiring diagram (N.1. bizhub 754e/654e)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.8.2 (Link to the Field Service Manual)