72-22 (bizhub 754e/654e)

Contents

JAM type	FS transport section
JAM code	72-22
Detection timing	<When FS-534 is installed> The sub tray exit sensor (PS8) is not blocked even after the set period of time has elapsed after the paper reaches the paper transport acceleration point.
	<When FS-535 is installed> The sub tray exit sensor (PS8) is not blocked even after the set period of time has elapsed after the Z-fold punch regist sensor (PS2) is turned ON by the paper.
Misfeed processing location	Front door
Relevant parts	<When FS-534 is installed> • Sub tray exit sensor (PS8) • FS control board (FSCB)
	<When FS-535 is installed> • Z-fold punch regist sensor (PS2) • Sub tray exit sensor (PS8) • FS control board (FSCB)

 (2)ProcedureWhen FS-534 is installed

Step	Action	Control signal	Location of electrical component
1	Initial check items	–	–
2	PS8 I/O check, sensor check	FSCB J9<B>-6 (ON)	FS-534 9-C
3	Replace FSCB (Part# A3EPPPBE01)	–	–

• Link to the wiring diagram (N.2.4 Finisher FS-534)

When FS-535 is installed

Step	Action	Control signal	Location of electrical component
1	Initial check items	–	–
2	PS2 I/O check, sensor check	FSCB CN14-10 (ON)	FS-535 7-D
3	PS8 I/O check, sensor check	FSCB CN24-10 (ON)	FS-535 8-L
4	Replace FSCB (Part# A2Y1H10002)	–	–

• Link to the wiring diagram (N.2.7 Finisher FS-535)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.1.10.11 (Link to the Field Service Manual)