How Can We Help?
72-35 (bizhub 558/458/368/308)
Contents
| JAM type | Misfeed at PI section | ||
| JAM code | 72-35 | ||
| JAM detection timing | <When FS-537+PI-507 or FS-537SD+PI-507 is installed> • When a paper is fed from the upper tray, the paper entrance sensor /Lw (PS206) is not turned ON (unblocked) even after the set period of time has elapsed after the transfer clutch /Up (CL201) turns ON by a paper. • When a paper is fed from the lower tray, The paper entrance sensor /Lw (PS206) is not turned ON (unblocked) even after the set period of time has elapsed after the transfer clutch /Lw (CL202) turns ON by a paper. | ||
| Misfeed processing location | Upper door | ||
| Relevant parts | <When FS-537+PI-507 or FS-537SD+PI-507 is installed> • Transfer clutch /Up (CL201) • Transfer clutch /Lw (CL202) • Paper entrance sensor /Lw (PS206) • PI drive board (PIDB) • FS control board (FSCB) |
Procedure
When FS-537+PI-507 or FS-537SD+PI-507 is installed
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS206 I/O check, sensor check | PIDB CN53<A>-5 (ON) | PI-507 10-C |
| 3 | CL201 operation check | PIDB CN54-3 (ON) | PI-507 6-C |
| 4 | CL202 operation check | PIDB CN56-1 (ON) | PI-507 9-C |
| 5 | PIDB ICP4 conduction check. | – | – |
| 6 | Replace PIDB. (Part# A8C6H00101) | – | – |
| 7 | Replace FSCB. (Part# A87HPP9M01) | – | – |
- Link to the wiring diagram (PI-507)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.16.13 (Link to the Field Service Manual)