How Can We Help?
72-35 (bizhub C658/C558/C458)
Contents
JAM type | Misfeed at PI section | |||||
JAM code | 72-35 | |||||
JAM detection timing | <When FS-537+PI-507 or FS-537SD+PI-507 is installed> When a paper is fed from the upper tray, the paper entrance sensor /Lw (PS206) is not turned ON (unblocked) even after the set period of time has elapsed after the transfer clutch /Up (CL201) turns ON by a paper. When a paper is fed from the lower tray, The paper entrance sensor /Lw (PS206) is not turned ON (unblocked) even after the set period of time has elapsed after the transfer clutch /Lw (CL202) turns ON by a paper. | |||||
Misfeed processing location | Upper door | |||||
Relevant parts | <When FS-537+PI-507 or FS-537SD+PI-507 is installed> • Transfer clutch /Up (CL201) • Transfer clutch /Lw (CL202) • Paper entrance sensor /Lw (PS206) • PI drive board (PIDB) • FS control board (FSCB) |
Procedure
When FS-537+PI-507 or FS-537SD+PI-507 is installed
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS206 I/O check, sensor check | PIDB CN53<A>-5 (ON) | PI-507 10-C |
3 | CL201 operation check | PIDB CN54-3 (ON) | PI-507 6-C |
4 | CL202 operation check | PIDB CN56-1 (ON) | PI-507 9-C |
5 | PIDB ICP4 conduction check. | – | – |
6 | Replace PIDB. (Part # A8C6H00101) | – | – |
7 | Replace FSCB. (Part# A87HPP9M01) | – | – |
- Link to the wiring diagram (PI-507)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.17.13 (Link to the Field Service Manual)