72-43 (bizhub C364e/C284e/C224e)
Contents
| JAM type | PK JAM | ||
| JAM code | 72-43 | ||
| Detection timing | <When FS-533+PK-519 is installed> The punch motor (PS202) does not detect rotation of the punch motor after the laps of given time after the punch motor (M201) started operating. | ||
| <When FS-534+PK-520 is installed> The punch position sensor (PS2) is not unblocked after a lapse of a given time after the punch drive motor (M1) starts rotating. | |||
| Misfeed processing location | -Finisher punch section (When FS-533+PK-519 is installed) -Front door (When FS-534+PK-520 is installed) | ||
| Relevant parts | <When FS-533+PK-519 is installed> -Punch motor (M201) -Punch motor sensor (PS202) -PK control board (PKCB) -FS control board (FSCB) | ||
| <When FS-534+PK-520 is installed> -Punch drive motor (M1) -Punch position sensor (PS2) -FS control board (FSCB) |
(2)ProcedureWhen FS-533+PK-519 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS202 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 5-C |
| 3 | M201 operation check | PKCB CN203-1 to 2 | FS-533 (PK-519) 4-C |
| 4 | Replace PKCB (Part# A3EWPP3102) | – | – |
| 5 | Replace FSCB (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2) | – | – |
- Link to the wiring diagram (N.2.6 FS-533)
When FS-534+PK-520 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS2 I/O check, sensor check | FSCB J7-2 (ON) | FS-534 (PK-520) 6-K |
| 3 | M1 operation check | FSCB J7-7 to 8 | FS-534 (PK-520) 7-K |
| 4 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.7 FS-534)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.10.12 (Link to the Field Service Manual)