72-85 (bizhub C754/C654)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | SD staple section | ||
| JAM code | 72-85 | ||
| Detection timing | <When FS-534+SD-511 is installed> The SD entrance sensor (PS1) is not blocked even after the set period of time has elapsed after the staple stacker paper detection sensor (PS31) is turned ON by the paper. | ||
| Misfeed processing location | -Front door -Stacker unit | ||
| Relevant parts | <When FS-534+SD-511 is installed> -SD entrance sensor (PS1) -Staple stacker paper detection sensor (PS31) -SD drive board (SDDB) -FS control board (FSCB) |
(2)Procedure When FS-534+SD-511 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS31 I/O check, sensor check | FSCB J12-11 (ON) | FS-534 6-C |
| 3 | PS1 I/O check, sensor check | SDDB J4-8 (ON) | SD-511 4-B |
| 4 | Replace SDDB (Part# A3ERPP6J03) | – | – |
| 5 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.4 Finisher FS-534)
- Link to the wiring diagram (N.2.5 Saddle stitcher SD-511)
K.1.10.34 (Link to the Field Service Manual)