C0202 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0202: Tray 1 feeder up/down abnormality
Rank	B
Trouble detection condition	The tray 1 upper limit sensor (PS22) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 1
Relevant electrical parts	-Tray 1 lift-up motor (M12) -Tray 1 upper limit sensor (PS22) -MFP board (MFPB)

 Procedure

1. Check the connector between M12-MFPB CN7E for proper connection and correct as necessary.
2. Check the connector of M12 for proper drive coupling and correct as necessary.
3. Check the connector between PS22-relay CN48-MFPB CN10E for proper connection and correct as necessary.
4. PS22 I/O check, sensor check
   • Control signal: MFPB CN10E-8 (ON)
   • Location of electrical component: 4-C
5. M12 operation check
   • Control signal: MFPB CN7E-1 to 2
   • Location of electrical component: 7-C
6. Replace M12. (Part# 9J06M10300)
7. MFPB F5E conduction check
8. Replace MFPB. (Part# A7AHH0201D)

NOTICE

• Link to the wiring diagram (bizhub 367/287/227)

K.3.7.6 (Link to the Field Service Manual)