C0204 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0204: Tray 2 feeder up/down abnormality
Rank	B
Trouble detection condition	The tray 2 upper limit sensor (PS25) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 2
Relevant electrical parts	-Tray 2 lift-up motor (M13) -Tray 2 upper limit sensor (PS25) -MFP board (MFPB)

 Procedure

1. Check the connector between M13-MFPB CN8E for proper connection and correct as necessary.
2. Check the connector of M13 for proper drive coupling and correct as necessary.
3. Check the connector between PS25-relay CN49-MFPB CN11E for proper connection and correct as necessary.
4. PS25 I/O check, sensor check
   • Control signal: MFPB CN11E-13 (ON)
   • Location of electrical component: 6-C
5. M13 operation check
   • Control signal: MFPB CN8E-1 to 2
   • Location of electrical component: 10-C
6. Replace M13. (Part# 9J06M10300)
7. MFPB F5E conduction check
8. Replace MFPB. (Part# A7AHH0201D)

NOTICE

• Link to the wiring diagram (bizhub 367/287/227)

K.3.7.7 (Link to the Field Service Manual)