C0206 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0206: Tray 3 lift-up failure (When PC-113 or PC-213 is installed)
Rank	B
Trouble detection condition	The tray 3 upper limit sensor (PS116) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 3
Relevant electrical parts	-Tray 3 lift-up motor (M113) -Tray 3 upper limit sensor (PS116) -PC control board (PCCB) -MFP board (MFPB)

 Procedure

1. Check the connector between M113-PCCB CN6 for proper connection and correct as necessary.
2. Check the connector of M113 for proper drive coupling and correct as necessary.
3. Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary.
4. PS116 I/O check, sensor check
   • Control signal: PCCB CN4-3 (ON)
   • Location of electrical component: PC-113/PC-213 7-C
5. M113 operation check
   • Control signal: PCCB CN6-8 to 9
   • Location of electrical component: PC-113/PC-213 2-C
6. Replace M113. (Part# 9J06M10300)
7. Replace PCCB. (PC-113 Part# A7VAH00100 / PC-213 Part# A7VAH00200)
8. MFPB F4E conduction check
9. Replace MFPB. (Part# A7AHH0201D)

NOTICE

• Link to the wiring diagram (PC-113)
• Link to the wiring diagram (PC-213)

K.3.7.8 (Link to the Field Service Manual)