C0208 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0208: Tray 4 lift-up failure (When PC-213 is installed)
Rank	B
Trouble detection condition	The tray 4 upper limit sensor (PS126) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 4
Relevant electrical parts	-Tray 4 lift-up motor (M123) -Tray 4 upper limit sensor (PS126) -PC control board (PCCB) -MFP board (MFPB)

 Procedure

1. Check the connector between M123-PCCB CN8 for proper connection and correct as necessary.
2. Check the connector of M123 for proper drive coupling and correct as necessary.
3. Check the connector between PS126-relay CN47-PCCB CN7 for proper connection and correct as necessary.
4. PS126 I/O check, sensor check
   • Control signal: PCCB CN7-3 (ON)
   • Location of electrical component: PC-213 8-K
5. M123 operation check
   • Control signal: PCCB CN8-8 to 9
   • Location of electrical component: PC-213 5-K
6. Replace M123. (Part# 9J06M10300)
7. Replace PCCB. (Part# A7VAH00200)
8. MFPB F4E conduction check
9. Replace MFPB. (Part# A7AHH0201D)

NOTICE

• Link to the wiring diagram (PC-213)

K.3.7.9 (Link to the Field Service Manual)