C0210 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0210: LCT lift failure (When PC-413 is installed)
Rank	B
Trouble detection condition	-The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. -The shifter stop / lower limit position sensor (PS138) is not turned OFF (unblocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. -The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operating. -The main tray upper limit sensor (PS136) is not turned OFF (unblocked) even after the set period of time has elapsed after the paper lift-down operation began. -The shifter stop / lower limit position sensor (PS138) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-down operation began.
Trouble isolation	Tray 3
Relevant electrical parts	-Elevator motor (M134) -Main tray upper limit sensor (PS136) -Shifter stop / lower limit position sensor (PS138) -PC control board (PCCB) -MFP board (MFPB)

 Procedure

1. Check the connector between M134-PCCB CN10 for proper connection and correct as necessary.
2. Check the connector of M134 for proper drive coupling and correct as necessary.
3. Check the connector between PS136-relay CN1-PCCB CN4 for proper connection and correct as necessary.
4. Check the connector between PS138-relay CN16-PCCB CN14 for proper connection and correct as necessary.
5. PS136 I/O check, sensor check
   • Control signal: PCCB CN4-3 (ON)
   • Location of electrical component: PC-413 8-J
6. PS138 I/O check, sensor check
   • Control signal: PCCB CN14-6 (ON)
   • Location of electrical component: PC-413 4-J
7. M134 operation check
   • Control signal: PCCB CN10-1 to 2
   • Location of electrical component: PC-413 6-J
8. Replace M134. (Part# A2XMM10100)
9. Replace PCCB. (Part# A7VAH00300)
10. MFPB F4E conduction check
11. Replace MFPB. (Part# A7AHH0201D)

NOTICE

• Link to the wiring diagram (PC-413)

K.3.7.10 (Link to the Field Service Manual)