C0202 (bizhub C368/C308/C258)

Contents

Trouble type	C0202: Tray 1 feeder up/down abnormality
Rank	B
Trouble detection condition	The tray 1 upper limit sensor (PS25) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 1
Relevant electrical parts	•Tray 1 lift-up motor (M12) •Tray 1 upper limit sensor (PS25) •MFP board (MFPB)

 Procedure

1. Remove the tray and check to see if a piece of paper is not left inside the machine.
2. Check the connector between M12-MFPB CN19E for proper connection and correct as necessary.
3. Check the connector of M12 for proper drive coupling and correct as necessary.
4. Check the connector between PS25-relay CN30-MFPB CN26E for proper connection and correct as necessary.
5. PS25 I/O check, sensor check
   • Control signal: MFPB CN26E-3 (ON)
   • Location of electrical component: 25-C
6. M12 operation check
   • Control signal: MFPB CN19E-5 (REM)
   • Location of electrical component: 21-C
7. Replace M12. (Part# 9J06M10300)
8. Replace MFPB. (Part# A7PUH02123)

NOTICE

• Link to the wiring diagram (bizhub C368/C308/C258)

Please verify part numbers for accuracy and current version.

K.3.7.6 (Link to the Field Service Manual)