How Can We Help?

C0202 (bizhub C4000i/C3300i)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeC0202: Tray 1 feeder up/down abnormality
RankB
Trouble detection conditionThe tray 1 upper limit sensor (PS7) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolationTray 1
Relevant electrical parts• Tray 1 lift-up motor (M6)
• Tray 1 upper limit sensor (PS7)
• CPU board (CPUB)
• Base board (BASEB)

Procedure

  1. Remove the tray and check to see if a piece of paper is not left inside the machine.
  2. Check the connector between M6-BASEB CN19E for proper connection and correct as necessary.
  3. Check the connector of M6 for proper drive coupling and correct as necessary.
  4. Check the connector between PS7-BASEB CN22E for proper connection and correct as necessary.
  5. Check CPUB for proper installation and correct as necessary.
  6. PS7 I/O check, sensor check
    • Control signal: BASEB CN22EA-7 (ON)
    • Location of electrical component: 12-C
  7. M6 load check
    • Check code: 23
    • Multi code: 4
    • Control signal: BASEB CN19E-7 to 8
    • Location of electrical component: 10-C
  8. Replace M6. (9J06M10300)
  9. Replace CPUB. ( C4000i)(AAJRH01005 ) (C3300i)(AAJTH01005)
  10. BASEB F11E conduction check
  11. Replace BASEB. ( AAJRH02005 )

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

(Link to the Field Service Manual) L.3.6.3.

Table of Contents