C0206 (bizhub C658/C558/C458)

Contents

Trouble type	C0206: Tray 3 feeder up/down abnormality (When PC-115 or PC-215 is installed)
Rank	B
Trouble detection condition	The tray 3 upper limit sensor (PS116) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 3
Relevant electrical parts	•Tray 3 lift-up motor (M113) •Tray 3 upper limit sensor (PS116) •PC control board (PCCB) •MFP board (MFPB)

 Procedure

1. Remove the tray and check to see if a piece of paper is not left inside the machine.
2. Check the connector between M113-PCCB CN6C for proper connection and correct as necessary.
3. Check the connector of M113 for proper drive coupling and correct as necessary.
4. Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary.
5. PS116 I/O check, sensor check
   • Control signal: PCCB CN4-3 (ON)
   • Location of electrical component: PC-115/PC-215 7-C
6. M113 operation check
   • Control signal: PCCB CN6C-8 to 9
   • Location of electrical component: PC-115/PC-215 2-C
7. Replace M113. (Part# A79JM11300)
8. Replace PCCB. (Part# A2XMM11000)
9. MFPB F1E conduction check
10. Replace MFPB. (C458 Part# A79MH02102 / C558 or C658 Part # A79JH02102)

NOTICE

• Link to the wiring diagram (PC-115)
• Link to the wiring diagram (PC-215)

Please verify all part numbers for accuracy and current version.

K.3.8.8 (Link to the Field Service Manual)