C0208 (bizhub C658/C558/C458)

Contents

Trouble type	C0208: Tray 4 feeder up/down abnormality (When PC-215 is installed)
Rank	B
Trouble detection condition	The tray 4 upper limit sensor (PS126) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	Tray 4
Relevant electrical parts	•Tray 4 lift-up motor (M123) •Tray 4 upper limit sensor (PS126) •PC control board (PCCB) •MFP board (MFPB)

 Procedure

1. Remove thetray and check to see if a piece of paper is not left inside the machine.
2. Check the connector between M123-PCCB CN8C for proper connection and correct as necessary.
3. Check the connector of M123 for proper drive coupling and correct as necessary.
4. Check the connector between PS126-relay CN47-PCCB CN7C for proper connection and correct as necessary.
5. PS126 I/O check, sensor check
   • Control signal: PCCB CN7C-3 (ON)
   • Location of electrical component: PC-215 8-K
6. M123 operation check
   • Control signal: PCCB CN8C-8 to 9
   • Location of electrical component: PC-215 5-K
7. Replace M123. (Part# 9J06M10300)
8. Replace PCCB. (Part# A2XMM11000)
9. MFPB F1E conduction check
10. Replace MFPB. (C458 Part# A79MH02102 / C558 or C658 Item # 9 Part # A79JH02102)

NOTICE

• Link to the wiring diagram (PC-215)

Please review all parts for accuracy and current version.

K.3.8.9 (Link to the Field Service Manual)