C0211 (bizhub 558/458)

Contents

Trouble type	C0211: Manual feed up/down abnormality
Rank	B
Trouble detection condition	• The bypass lift-up position sensor (PS26) is not turned OFF (unblock) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The bypass lift-up position sensor (PS26) is not turned ON (blocked) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
Trouble isolation	Manual
Relevant electrical parts	• Transport motor (M1) • Bypass pick-up solenoid (SD1) • Bypass lift-up position sensor (PS26) • MFP board (MFPB)

 Procedure

1. Check the connector between M1-MFPB CN14E for proper connection and correct as necessary.
2. Check the connector of M1 for proper drive coupling and correct as necessary.
3. Check the connector between PS26-relay CN19-MFPB CN19E for proper connection and correct as necessary.
4. Check the connector between SD1-relay CN21-relay CN19-MFPB CN19E for proper connection and correct as necessary.
5. PS26 I/O check, sensor check
   • Control signal: MFPB CN19E-13 (ON)
   • Location of electrical component: 22-J
6. SD1 operation check
   • Control signal: MFPB CN19E-9 (ON)
   • Location of electrical component: 22-J
7. M1 operation check
   • Control signal: MFPB CN41E-3 (REM), MFPB CN14E-6 (LOCK)
   • Location of electrical component: 1-C
8. Replace M1. (Part# A79JM11400)
9. MFPB ICP3E conduction check
10. Replace MFPB. (558 Part# A9HGH02102 / 458 Part# A9HHH02102)

NOTICE

• Link to the wiring diagram (bizhub 558/458)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.8.11 (Link to the Field Service Manual)