C1081 (bizhub C360i/C300i/C250i)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeC1081: SD communication error (Finisher detection)
RankC
Trouble detection condition<When FS-536SD is installed>
When a communication error is detected between the FS control board (FSCB) and the SD control board (SDCB).
Trouble isolationCenter Stapling/Half-Fold/Tri-Fold (C1081 only)
Relevant electrical parts• SD control board (SDCB)
• FS control board (FSCB)

Procedure

  1. Turn OFF the main power switch and unplug the power cord. Connect the power cord after 15 sec. or more, and turn ON the main power switch.
  2. Rewrite the firmware.
  3. Replace SDCB. (Part# A3EP560100)
  4. Replace FSCB. (Part# A87GPP0V00)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

L.3.7.2 (Link to the Field Service Manual)