C1105 (bizhub C364/C284/C224)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| Trouble type | Bundle eject motors drive malfunction | |
| Trouble code | C1105 | |
| Rank | B | |
| Detection timing | <When FS-534 is installed> -The gripper home position sensor (PS18) does not block even after the set period of time has elapsed after the gripper position detection sensor (PS19) unblocked. -The gripper position detection sensor (PS19) does not block even after the set period of time has elapsed after it unblock -The gripper position detection sensor (PS19) does not block even after the set period of time has elapsed after the gripper home position sensor (PS18) unblocked. -The gripper home position sensor (PS18) does not block even after the set period of time has elapsed after the bundle eject motor (M10) unblocked.The gripper home position sensor (PS18) and the gripper position detection sensor (PS19) are blocked at the same time. | |
| Trouble isolation | – | |
| Relevant electrical parts | -Bundle eject motor (M10) -Gripper home position sensor (PS18) -Gripper position detection sensor (PS19) -FS control board (FSCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the motor and sensor connectors for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M10 for proper drive coupling, and correct as necessary. | – | – |
| 3 | PS18 I/O check, sensor check | FSCB J13-13 (ON) | FS-534 7-C |
| 4 | PS19 I/O check, sensor check | FSCB J12-3 (ON) | FS-534 7-C |
| 5 | M10 operation check | FSCB J13-1 to 2 | FS-534 8-C to D |
| 6 | Replace M10 (Part# A87GPP1400) | – | – |
| 7 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.7 FS-534)
- Link to the layout drawings for related parts by each trouble code (S.17. C1105)
K3.6.5 (Link to the Field Service Manual)