C1106 (bizhub 364e/284e/224e)
Contents
| Trouble type | Stapler movement motors malfunction | |
| Trouble code | C1106 | |
| Rank | B | |
| Detection timing | <When FS-533 is installed> • The stapler home sensor (PS110) is not unblocked after the laps of given time after it started operating from the home position. • The stapler home sensor (PS110) is not unblocked after the laps of give time after the stapler movement motor (M107) turned ON when it returned to the home position. | |
| <When FS-534 is installed> | • The stapler home position sensor (Rear) (PS23) is not blocked or unblocked even after the set period of time has elapsed after the side stapler movement motor (M13) turned ON. • The stapler does not reach the specified position within the set period of time. | |
| Trouble isolation | Staple | |
| Relevant electrical parts | <When FS-533 is installed> • Stapler movement motor (M107) • Stapler home sensor (PS110) • Stapler relay board (STREYB) • FS control board (FSCB) | |
| <When FS-534 is installed> • Side stapler movement motor (M13) • Stapler home position sensor (Rear) (PS23) • FS control board (FSCB) |
(2)ProcedureWhen FS-533 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M107-STREYB CN123 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M107 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS110-FSCB CN110 for proper connection, and correct as necessary. | – | – |
| 4 | PS110 I/O check, sensor check | FSCB CN110 | FS-533 8-D to E |
| 5 | M107 operation check | STREYB CN123-5 to 8 | FS-533 5-L |
| 6 | Replace M107 (Part# A2YUPPT400 ) | – | – |
| 7 | Replace STREYB (Part# A2YUPPG700 ) | – | – |
| 8 | FSCB CP107 conduction check | – | – |
| 9 | Replace FSCB (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2) | – | – |
- Link to the wiring diagram (N.2.6 FS-533)
- Link to the layout drawings for related parts by each trouble code (S.18.1 FS-533)
When FS-534 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M13-relay CN3-FSCB J11 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M13 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS23-relay CN3-FSCB J11 for proper connection, and correct as necessary. | – | – |
| 4 | PS23 I/O check, sensor check | FSCB J11<B>-3 (ON) | FS-534 4-C |
| 5 | M13 operation check | FSCB J11<A>-1 to 4 | FS-534 4-C to D |
| 6 | Replace M13 (Part# A3EPPP9104 ) | – | – |
| 7 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.7 FS-534)
- Link to the layout drawings for related parts by each trouble code (S.18.2 FS-534)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
(Link to the Field Service Manual) K.3.6.6