C1132 (bizhub C364e/C284e/C224e)
Contents
| Trouble type | Punch drive motor’s malfunction | |
| Trouble code | C1132 | |
| Rank | B | |
| Detection timing | <When FS-533+PK-519 is installed> • The puncher drive cam sensor (PS203) or puncher home sensor (PS204) is not blocked or unblocked even after the set period of time has elapsed while the punch motor (M201) is energized. • The punch motor sensor (PS202) does not turn ON after the punch motor (M201) stopped. • The holes with other marketing area is set in [Service Mode] -> [Finisher] -> [Punch Option Setting] | |
| <When FS-534+PK-520 is installed> The punch home sensor (PS1) is not blocked or unblocked even after the set period of time has elapsed while the punch drive motor (M1) is energized. | ||
| Trouble isolation | – | |
| Relevant electrical parts | <When FS-533+PK-519 is installed> • Punch motor (M201) • Punch motor sensor (PS202) • Puncher drive cam sensor (PS203) • Puncher home sensor (PS204) • PK control board (PKCB) • FS control board (FSCB) | |
| <When FS-534+PK-520 is installed> • Punch drive motor (M1) • Punch home sensor (PS1) • FS control board (FSCB) |
(2)ProcedureWhen FS-533+PK-519 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the number of the holes in [Service Mode] -> [Finisher] -> [Punch Option Setting] | – | – |
| 2 | Check the connector between M201-PKCB CN203 for proper connection, and correct as necessary. | – | – |
| 3 | Check the connector of M201 for proper drive coupling, and correct as necessary. | – | – |
| 4 | Check the connector between PS202-PKCB CN204 for proper connection, and correct as necessary. | – | – |
| 5 | Check the connector between PS203-PKCB CN204 for proper connection, and correct as necessary. | – | – |
| 6 | Check the connector between PS204-PKCB CN204 for proper connection, and correct as necessary. | – | – |
| 7 | PS202 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 5-C |
| 8 | PS203 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 6-C |
| 9 | PS204 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 6-C |
| 10 | M201 operation check | PKCB CN203-1 to 2 | FS-533 (PK-519) 4-C |
| 11 | Replace M201 (Part# A3EWPP3201) | – | – |
| 12 | PKCB F201 conduction check | – | – |
| 13 | Replace PKCB (Part# A3EWPP3102) | – | – |
| 14 | Replace FSCB (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2) | – | – |
- Link to the wiring diagram (N.2.6 FS-533)
- Link to the layout drawings for related parts by each trouble code (S.24.1 FS-533/PK-519)
When FS-534+PK-520 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M1-relay CN351-FSCB J7 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M1 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS1-FSCB J7 for proper connection, and correct as necessary. | – | – |
| 4 | PS1 I/O check, sensor check | FSCB J7-5 (ON) | FS-534 (PK-520) 7-K |
| 5 | M1 operation check | FSCB J7-7 to 8 | FS-534 (PK-520) 7-K |
| 6 | Replace M1 (Part# A4JUF93100 Punch Unit/2 / Part# A4JUF93200 Punch Unit/3) | – | – |
| 7 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.7 FS-534)
- Link to the layout drawings for related parts by each trouble code (S.24.2 FS-534/PK-520)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.6.12 (Link to the Field Service Manual)