C1140 (bizhub C364e/C284e/C224e)
Contents
| Trouble type | Alignment plate motor/Rr’s malfunction | |
| Trouble code | C1140 | |
| Rank | B | |
| Detection timing | <When FS-533 is installed> • The alignment plate home sensor/R (PS109) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position. • The alignment plate home sensor/R (PS109) is not blocked after the set period of time has elapsed when the plate returns to the home position. | |
| <When FS-534 is installed> The alignment plate/R home sensor (PS13) is not blocked or unblocked even after the set period of time has elapsed while the alignment motor/Rr (M8) is energized. | ||
| Trouble isolation | – | |
| Relevant electrical parts | <When FS-533 is installed> • Alignment motor/R (M106) • Alignment plate home sensor/R (PS109) • FS control board (FSCB) | |
| <When FS-534 is installed> • Alignment motor/Rear (M8) • Alignment plate/R home sensor (PS13) • FS control board (FSCB) |
(2)ProcedureWhen FS-533 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M106-FSCB CN102 for proper connection and correct as necessary. | – | – |
| 2 | Check the connector of M106 for proper drive coupling and correct as necessary. | – | – |
| 3 | Check the connector between PS109-relay CN106-FSCB CN102 for proper connection and correct as necessary. | – | – |
| 4 | PS109 I/O check, sensor check | FSCB CN102 | FS-533 7-J |
| 5 | M106 operation check | FSCB CN102 | FS-533 8-J |
| 6 | Replace M106 (Part# A2YUPPW600) | – | – |
| 7 | FSCB CP105 conduction check | – | – |
| 8 | Replace FSCB (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2)) | – | – |
- Link to the wiring diagram (N.2.6 FS-533)
- Link to the layout drawings for related parts by each trouble code (S.25.1 FS-533)
When FS-534 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M8-FSCB J12 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M8 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS13-FSCB J9 for proper connection, and correct as necessary. | – | – |
| 4 | PS13 I/O check, sensor check | FSCB J9<B>-9 (ON) | FS-534 9-C |
| 5 | M8 operation check | FSCB J12-13 to 16 | FS-534 5 to 6-C to D |
| 6 | Replace M8 (Part# A3EPPP5500) | – | – |
| 7 | Replace FSCB (Part# A3EPPPBE01) | – | – |
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.6.13 (Link to the Field Service Manual)