How Can We Help?

C11E1 (bizhub 360i/300i)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

When FS-539 or FS-539SD is installed

Contents

Trouble typeC11E1: Paper exit switching drive malfunction (When FS-539 or FS-539SD is installed)
RankB
Trouble detection conditionThe route change gate home sensor (PS30) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed after the FNS entry transport motor (M2) is energized.
Trouble isolation–
Relevant electrical parts-FNS entry transport motor (M2)
-Route change gate home sensor (PS30)
-FS control board (FSCB)

Procedure

  1. Check the connector between M2-FSCB J9 for proper connection and correct as necessary.
  2. Check the connector of M2 for proper drive coupling and correct as necessary.
  3. Check the connector between PS30-FSCB J5 for proper connection and correct as necessary.
  4. PS30 I/O check, sensor check
    • Control signal: FSCB J5-9 (ON)
    • Location of electrical component: FS-539/FS-539SD 15-K
  5. M2 operation check
    • Control signal: FSCB J9<A>-1 to 4
    • Location of electrical component: FS-539/FS-539SD 12-C
  6. Replace M2. (Part# A3EPPP5302)
  7. Replace FSCB. (Part# AAR4PP8201)

(Link to the Field Service Manual)

Table of Contents