How Can We Help?
C2650 (bizhub 360i/300i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| Trouble type | C2650: Main backup media access error |
| Rank | C |
| Trouble detection condition | The re-written data, which has been read out, checked and founded as error, is read out again and found as error.The error was found when reading out the counter value.The main body detects that the backup board is not mounted. |
| Trouble isolation | – |
| Relevant electrical parts | -Backup board (ERB) -CPU board (CPUB) -Base board (BASEB) |
Procedure
- Check the connector between ERB CN1-BASEB CN27E for proper connection and correct as necessary.
- Check CPUB for proper installation and correct as necessary.
- Replace CPUB. (Part# AC77H02P02)
- Replace BASEB. (Part# AC77H02101)
- Replace ERB. (Part# AA2JH00C00)
1. Replace the current ERB with a new one.
2. Replace the following components with new ones.
When the transfer belt unit and the fusing unit have been replaced with new ones, perform [Service Mode] -> [Counter] -> [Life] -> [New Release]. When the transfer roller has been replaced with a new one, perform the counter reset in [Service Mode] -> [Counter] -> [Life].- Developing unit (Part# ACV803D)
- Drum unit (Part# AAV70RD)
- Toner cartridge (Part# AC7A030)
- Transfer belt unit (Part# AC74R70100)
- Fusing unit (Part# AA2JR70311)
- Transfer roller (Part# AA2JR72000)
- Feed roller
Tray 1-2: (Part# A64J564101)
Manual bypass tray: (Part# A00F623201) - pick-up roller
Tray 1-2: (Part# A64J564201)
Manual bypass tray: (Part# A5C1562200) - separation roller (including options)
Tray 1-2: (Part# AA2J560000)
Manual bypass tray: (Part# AA7N591100)
3. Turn ON the main power switch and check to see that warm-up is started.
Make sure that malfunction codes other than C2650 or improper IU/TC placement is not detected.
4. Make the specified readjustments.
- If the above actions do not solve the problem, contact KM.