C3421 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C3421: Fusing warm-up trouble (Middle of the heating roller)
Rank	A
Trouble detection condition	Detected temperature of the thermistor/1 (TH1) or thermistor/2 (TH2) does not go up a given range of temperature even after a lapse of given period of time at warm up.
Trouble isolation	–
Relevant electrical parts	-Fusing unit -Thermistor/1 (TH1) -Thermistor/2 (TH2) -DC power supply (DCPU) -MFP board (MFPB)

 Procedure

1. Check the fusing unit for correct installation (whether it is secured in position).
2. Check the open/close operation of the right door.
3. Check the connector between the fusing unit-relay CN19-MFPB CN18E for proper connection and correct as necessary.
4. Check the connector between the fusing unit-relay CN7AC-DCPU CN2 for proper connection and correct as necessary.
5. Check the connector between MFPB CN2E-DCPU CN7 for proper connection and correct as necessary.
6. Replace the fusing unit. (Part# A7AHR72311 or A7AHPP3800(For refresh model))
7. Replace MFPB. (Part# A7AHH0201D)
8. Replace DCPU. (Part# A7AHR70500 or A7AHPP3300(For refresh model))

K.3.10.1 (Link to the Field Service Manual)