C6103 (bizhub 287/227)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C6103: Slider over running
Rank	B
Trouble detection condition	The scanner home sensor (PS105) detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.
Trouble isolation	Scanner
Relevant electrical parts	-Scanner home sensor (PS105) -Scanner motor (M101) -MFP board (MFPB)

 Procedure

1. Correct or change the scanner drive (pulley, gear, belt) if it is faulty.
2. Correct the scanner motor set screw if loose.
3. Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].
4. Check the connector between M101-relay CN6IR-MFPB CN26E for proper connection and correct as necessary.
5. Check the connector between PS105-MFPB CN27E for proper connection and correct as necessary.
6. PS105 I/O check, sensor check
   • Control signal: MFPB CN27E-15 (ON)
   • Location of electrical component: 5-V
7. M101 operation check
   • Control signal: MFPB CN26E-1 to 4
   • Location of electrical component: 6-W
8. Replace MFPB. (Part# A7AHH0201D)

NOTICE

• Link to the wiring diagram (bizhub 367/287/227)

K.3.13.1 (Link to the Field Service Manual)