C6103 (bizhub 754e/654e)

Contents

Trouble type	Slider over running
Trouble code	C6103
Rank	B
Detection timing	The scanner home sensor detects the scanner at its home position during a period of time that begins with the time when a pre-scan command and a scan preparation command are executed and ends when a home return command is executed.
Trouble isolation	Scanner
Relevant electrical parts	• Scanner home sensor (PS201)  • Scanner motor (M201)  • Scanner drive board (SCDB)  • MFP board (MFPB)

  (2)Procedure

Step	Action	Control signal	Location of electrical components
1	Correct or change the scanner drive (pulley, gear, belt) if it is faulty.	–	–
2	Correct the scanner motor set screw if loose.	–	–
3	Adjust [Image Position Leading Edge] and [Sub Scan Zoom Adj.].	–	–
4	Check the PS201, M201, SCDB and MFPB connector for proper connection and correct as necessary.	–	–
5	PS201 I/O check, sensor check	SCDB PJ6-3 (ON)	17-V
6	M201 operation check	SCDB PJ4-1 to 6	17-V
7	Replace SCDBSCDB (Part# A2X0H01A12)	–	–
8	Replace MFPBMFPB (Part# A55VH02304)	–	–

• Link to the wiring diagram (N.1. bizhub 754e/654e)
• Link to the layout drawings for related parts by each trouble code (S.92. C6102, C6103)

Document Information ID D0001104804 Revise ID R000003

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.11.3 (Link to the Field Service Manual)