C9401 (bizhub C360i/C300i/C250i)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeC9401: Exposure LED lighting failure
RankB
Trouble detection conditionThe output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
Trouble isolationScanner
Relevant electrical parts• LED exposure unitFlat cable (LED exposure unit)
• CCD unitScanner drive board (SCDB)
• CPU board (CPUB)
• Base board (BASEB)

Procedure

  1. Correct the harness connection between SCDB CN3-LU201 if faulty.
  2. Check the connector between SCDB CN2-BASEB CN6E for proper connection and correct as necessary.
  3. Check the connector between CCDB CN2-BASEB CN6 for proper connection and correct as necessary.
  4. Check CPUB for proper installation and correct as necessary.
  5. Replace the LED exposure unit. (Part# AA2JR71400)
  6. Replace the CCD unit. (Part# AA2JR70100)
  7. Replace SCDB. (Part# AA2JH01A00)
  8. Replace CPUB. (Part# AA2JH02N06)
  9. Replace BASEB. (Part# AA2JH02005)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

L.3.15.1 (Link to the Field Service Manual)